Air Pump AP-8806

Product features:

1. Use double casing, have quiet tone effect.

2. Use potentiometer to adjust input power, easy handle.

3. Use AC motor ,special-purposed synthetic rubber subassembly, high pressure, max output, constant parameters.

4. Professional design, rational construction, nice shape. ABS housing, high impact, long service life.

Caution:

• 1. Do not connect to any voltage other than shown on the pump.
• 2. Do not oil at any time.
• 3. Air pump must be placed above water level. If not, ensure that a one way check valve is fitted to the air tube to prevent water from syphoning back into air pump.
• 4. Disconnect the plug immediately if the pump falls down into the water.
• 5. If the power supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid electrical hazard.

Installation:

Place your air pump above the water level in vertical or horizontal position, if you place it below the water level you must use a check valve, this way you'll avoid any backflow of water when the current fails.

Operation:

Your air pump isn't intended to be used in water. Never place the air pump in water!!

Danger: in case the air pump falls in the water, disconnect it before you remove it.

Maintenance:

How to disconnect the air pump:

A-Remove the tubbing connected to the air pump;

B-Disconnect from the mains.